TPC L700 Lucent Dental Light, Руководство по эксплуатации и обслуживанию

Страница: 8 / 14

8
Light Bulb replacement
•
If you need to replace your operatory light bulb please follow the steps listed below.
•
Remove the rear panel cover from the back of the light. Turn the thumb nut counter
clockwise to remove it.
Thumb Screw
•
Remove the light bulb retaining spring by pushing it down then pulling it back towards
the center of the light bulb socket.
Retaining spring
•
Once the spring is removed then disconnect the light bulb from the wire. Slide the high
temperature heat shield back to expose the light connection.
High temperature heat shield and light bulb connection.
•
When handling the replacement light bulb be sure not to touch the glass as the oils on
your hands can damage the bulb. Reverse the above steps once the new bulb is in place.