7
Typical connection diagram
2.2.4
IO connection
TRS67-8I-8O series IO signal is PNP. Please pay attention to the wiring method when connecting the sensor and
actuator, the typical connection diagram is shown below.
Typical Connection diagram input
Typical Connection diagram output
2.3
Device fasten
Please use standard M4 screws to fix the module, the fixing surface should be kept flat, the module cannot bear
bending stress.
Chapter three: Configuration and operation instructions
3.1
ESI file
TRS67-8I-8O use equipment description files (ESI) that comply with the EtherCAT V2.3 standard
3.2
Main parameters
Housing material
PC
Filler material
Polyurethane
Metal material
Copper nickel plated
Weight
300 g
Operating temperature
-25 – 60 °C
If the device is used at an ambient temperature higher than 50 °C, be careful of high
temperature burns when it contacts with the metal surface of the device
Storage temperature
From -30 to 70 °C
Operating humidity
From 5% to 95%
Storage humidity
From 5% to 95%
Operating pressure
From 70 to 106 kPa
Protecting degree
IP67
