8
3.6
IO connection
Connection method
M12 A code 5 pin
Type
PNP
Input type
EN 61131-2 types 1 and 3
IO typical voltage
24VDC
Actuator current
500 mA/one signal
Sensor current
500 mA/one signal
Protection of overload and short circuit
870 mA/self-fixable
3.7
Electrical isolation
Testing parts
Testing voltage
US power Supply/ETH 1
500 VAC, 50 Hz, 1 Min
US power supply/ETH 2
500 VAC, 50 Hz, 1 Min
US power supply/FE
500 VAC, 50 Hz, 1 Min
ETH 1/FE
500 VAC, 50 Hz, 1 Min
ETH 2/FE
500 VAC, 50 Hz, 1 Min
ETH 1/ETH 2
500 VAC, 50 Hz, 1 Min
US/UA power supply
500 VAC, 50 Hz, 1 Min
UA power supply/ETH 1
500 VAC, 50 Hz, 1 Min
UA power supply/ETH 2
500 VAC, 50 Hz, 1 Min
UA power supply/FE
500 VAC, 50 Hz, 1 Min
3.8
Mechanical test
Vibration resistance according to EN60068-2-
6/IEC60068-2-6
5 g
Shock complies with EN 60068-2-27/IEC 60068-2-27 30 g, 11ms cycle, half-sine shock pulse
Continuous impact according to EN60068-2-
27/IEC60068-2- 27
10 g
3.9
EMC test
Noise immunity test complies with EN 61000-6-2 standard
ESD EN 61000-4-2/IEC 61000-4-2
Standard B, 6 kV contact discharge, 8 kV air discharge
Electromagnetic field EN 61000-4-3/IEC 61000-4-3
Standard A, field strength: 10 V/m
Electrical fast transient burst immunity EN 61000- 4-4
/IEC 61000-4-4
Standard B, 2 kV
Surge immunity (Surge) EN 61000-4-5/IEC 61000-4-5 Standard B, DC power cord: ±0.5 kV/±0.5 kV
(symmetry/asymmetry)
Conducted interference EN 61000-4-6/IEC
61000-4-6
Standard A; testing voltage 10 V
Noise emission test according to EN 61000-6-4
Radio interference EN 55022
Class A
