TP-Link TW-MR3220, Руководство пользователя

Страница: 57 / 104

TL-MR3220 3G/4G Wireless N Router User Guide
-46-
4. Enter the IP Address of the computer in the
IP Address
box.
5. Select the protocol used for this application, either
TCP
or
UDP
, or
All
.
6. Select the
Enable
check box to enable the virtual server.
7. Click the
Save
button.

Note
:
If your computer or server has more than one type of available service, please select another
service, and enter the same IP Address for that computer or server.
To modify or delete an existing entry:
1. Click the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
2. Modify the information.
3. Click the
Save
button.
Click the
Enable All/ Disable All
button to make all entries enabled/ disabled.
Click the
Delete All
button to delete all entries.
Click the
Next
button to go to the next page and click the
Previous
button to return the
previous page.

Note
:
If you set the service port of the virtual server as 80, you must set the Web management port on
“
Security –> Remote Management
” page to be any other value except 80 such as 8080.
Otherwise there will be a conflict to disable the virtual server.
4.8.2 Port Triggering
Choose menu “
Forwarding
→
Port Triggering
”, you can view and add port triggering in the next
screen (shown in Figure 4-37). Some applications require multiple connections, like Internet
games, video conferencing, Internet calling and so on. These applications cannot work with a
pure NAT Router. Port Triggering is used for some of these applications that can work with an
NAT Router.