8
Chapter 2
Use Your Powerline Adapter
2 3 Secure Your Powerline Network by Pairing
All powerline adapters share some common factory settings, and can communicate
with one another. If you want your powerline adapters to communicate only with your
own powerline adapters, you should pair them. Thus a secured powerline network is
formed and other powerline adapters can no longer join your powerline network without
being paired.
Note:
You can only pair two devices at a time.
Secure my powerline network and prevent other powerline devices from being added
to my network.
For example,
I’ve extended my network using the Plug & Play method. Now I want to
secure my network.
1. Verify all powerline devices’ Power LEDs are solid on.
Tips:
We recommend that you plug in your powerline devices near each other, or as close to each other
as possible when pairing. Your settings will not be affected. The devices can be relocated to where they are
needed once pairing is complete.
2. Press the Pair button on one of the powerline devices for 1 second. Its Power LED
starts blinking.
3. Within 2 minutes, press the Pair button on another powerline adapter for 1 second.
Its Power LED starts blinking. When the Powerline LED turns on, the pairing
process is complete.
AV600
Blinking
On
within 2 minutes
AV600
Blinking
Done!
Enjoy your secure powerline network!
I want to:
How can I do that?
