TP-Link TL-WR841ND - Wireless N Router Atheros 2T2R 2.4GHz 802.11n 2.0, Руководство пользователя

Страница: 2 / 7

The Rear Panel

ON/OFF : The switch for the power.

POWER : The Power socket is where you will connect the power adapter. Please use the power
adapter provided with this TL-WR841N/TL-WR841ND 300Mbps Wireless N Router.

4,3,2,1 (LAN) : These ports (4,3,2,1) connect the Router to the local PC(s).

WAN : This WAN port is where you will connect the DSL/cable Modem, or Ethernet.

WIFI ON/OFF
: This switch is used to enable/disable the Router’s wireless function.

WPS/RESET : This button is used for both WPS and Reset function. To use the WPS function, press
it for less than five seconds; to use the RESET function, press it for more than five seconds.
Performing a Factory Reset
There are two ways to reset to the Router's factory defaults:
1. Use the Factory Defaults function on System Tools -> Factory Defaults page in the Router's
Web-based Utility.
2. Use the WPS/RESET button: With the Router powered on, press and hold the WPS/RESET button
(more than 5 seconds) until the SYS LED becomes quick-flash from slow-flash. Then release the
button and wait the Router to reboot to its factory default settings.