Specifications
Compatiblity
We recommend that you use only TP-Link modules on your
TP-Link devices.
Note:
*TL-SM331T does not support the data rate of 10 Mbps or 100 Mbps.
**When a gigabit RJ45 SFP module is inserted into a 10G SFP+ slot, extra
configuration for port data rate may be required.
https://www.tp-link.com/support/download/tl-sm331t/#Compatibility
To check the compatible TP-Link devices of your module,
please scan the QR code or visit our website:
Product Operating Temperature
0˚C to 70˚C (32˚F to 158˚F)
Storage Temperature
-40˚C to 85˚C (-40˚F to 185˚F)
Storage Humidity
5% to 90% RH, Non-condensing
Operating Humidity
10% to 90% RH, Non-condensing
Environmental and Physical Specifications
General Specifications
RX_LOS
MAC Interface
Power Consumption (max.)
Standards and Protocols
Model
Data Rate* (max.)
TX_Fault
TX_Disable
Hot Swappable
LLF
LFP
Cable Distance
DDM
0.8 W
/
/
Yes
Yes
/
/
1000BASE-X
1.25 Gbps
TL-SM331T
1000BASE-T: UTP
cat.5e or above
(max. 100m)
/
IEEE 802.3
IEEEE 802.3ab
SFF-8472
Model
Supported
Gigabit SFP Slot (SFP Slot)
TL-SM331T
Supported**
10G SFP+ Slot (SFP+ Slot)
2. Pull down the latch and remove the module.
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need
service, please contact us.
Avoid using this product during an electrical storm. There may be a remote risk
of electric shock from lightning.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/support/ce.
EU Declaration of Conformity
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Electromagnetic Compatibility
Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK Declaration of Conformity may be found at
https://www.tp-link.com/support/ukca
