02
Smart Switch
LED
Status
Indication
10/100M
On
A device is linked to the corresponding port
Flashing
Data is being transmitted or received
Green
The linked device is running at 100Mbps
Yellow
The linked device is running at 10Mbps
1000M
On
A device is linked to the corresponding port
Flashing
Data is being transmitted or received
Green
The linked device is running at 1000Mbps
Yellow
The linked device is running at 10/100Mbps
Port Feature
Model
10/100Mbps RJ45 Port 10/100/1000Mbps RJ45 Port SFP Port
TL-SL2428
24
4
2
RESET
With the Switch powered on, press Reset button for five seconds to reset the
software setting to its factory default settings.
10/100Mbps RJ45 Port
Designed to connect to the device with a bandwidth of 10Mbps or 100Mbps. Each
has a corresponding 10/100M LED.
10/100/1000Mbps RJ45 Port
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or
1000Mbps. Each has a corresponding 1000M LED.
SFP Port
Designed to install the SFP module. It shares LEDs with 1000Mbps ports. When a
1000Mbps SFP module is inserted into the SFP port, On(green1 LED of 1000M means
a device is linked to the port and Flashing(green1 LED of 1000M indicates data is
being transmitted or received on the port.
Rear Panel
■
The rear panel of TL-SL2428 is shown as the following figure.
Rear Panel of
Figure 1-2
TL-SL2428
Grounding Terminal
Power Socket
Introduction
