46
9
Obtain an IP address automatically (DHCP)
– If a DHCP server is installed and enabled
on the network, to select this for the IP address can be assigned by the DHCP server.
9
Use the following IP address
- Select this when the fixed IP address is set.
IP address
: Enter the IP address of the Camera, which must be in the same subnet
with that of the desired AP/ Router.
Subnet mask
: Enter the subnet mask.
Default gateway
: Enter the default gateway.
9
Obtain DNS server address automatically
- If you select
Obtain an IP address
automatically (DHCP)
above, this entry will display in the figure. Select this to obtain the
address of DNS server automatically.
9
Use the following DNS server address
- Select this when you set the fixed address as
the IP address of DNS server.
Primary DNS server
: Enter the IP address of the primary DNS server.
Secondary DNS server
: Enter the IP address of the secondary DNS server, if
necessary.
6.3.8 WPS
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing network
quickly.
If the router supports Wi-Fi Protected Setup (WPS) or Quick Setup Security (QSS), you can establish a
wireless connection between wireless IP Camera and router using either Push Button Configuration
(PBC) method or PIN method.
I.
PBC (Push Button Configuration) method
1. Press the QSS button of the router.
2. Press
the
WPS
button on the Camera in two minutes.
II. PIN
method
1. Firstly, check
PIN
in the following screen. You can also click the
Generate new PIN
to get a
new PIN.
Содержание TL-SC3430N
Страница 1: ...TL SC3430N Wireless N H 264 Megapixel Surveillance Camera Rev 1 0 0 1910010550...
Страница 5: ...ii Europe EU Declaration of Conformity 89 Federal Communication Commission Interference Statement 92...
Страница 44: ...39 4 Type domain in the Hostname field and select sub domain 5 After typing information check your DDNS service...
Страница 83: ...78 Enable Remote Log Enables user to send the log data to a specified log server...
