TL-R4000
Enterprise Broadband Router User Guide
24
Figure 4-21 Add or Modify a Virtual Server Entry
¾
Common Service Port
-
Some common services already listed in the pull-down
list.
To setup a virtual server entry:
1. Click
the
Add New..
button.
2. Select the service you want to use from the
Common Service Port
list, If the
Common Service Port
list does not have the service that you want to use, enter
the number of the service port or service port range in the
Service Port
box.
3. Enter the IP address of the computer in the
Server IP Address
box.
4. Select the protocol used for this application, either
TCP
,
UDP
, or
All
.
5. Select
the
Enable
in the
Status
pull-down list
.
6. Click
the
Save
button.
)
Note:
It is possible that you have a computer or server that has more than one type of
available service. If so, select another service, and enter the same IP address for that
computer or server.
To modify or delete an existing entry
:
1. Find the desired entry in the table.
2. Click
Modify
or
Delete
as desired on the
Modify
column.
Click the
Enable All
button to make all the entries enabled.
Click the
Disable All
button to make all the entries disabled.
Click the
Delete All
button to delete all the entries.
