TL-PA8030P
AV1200 3-Port Gigabit Passthrough Powerline Adapter
15
network name of this device on the
System
configuration page. To change the name of a powerline
device or enter its password, please follow the steps below:
(1) Select the desired device and click the
Modify
button to display the following dialog.
(2) Enter a new name for the selected device and enter its password (Take note of the password
format). The password can be found on the back of the powerline device.
(3) Click the
Save
button to make the settings effective.
Note:
Password is unnecessary to enter for renaming.
4.2.2 Add Device
You can add a remote powerline device to your network that is not in the displayed list. You are
suggested to locate the passwords for all powerline devices you wish to manage and add them to the
local logical network by clicking the
Add
button.
Click the
Add
button to display the following dialog box. This dialog box allows you to enter both the
selected device’s name and password. Note that the powerline device must be present on the power
grid in order to activate the set password and be added to the local network.
Enter your
Device Name
and
Password
(Take note to the password format) and click the
Save
button
after setup.
