TG-5269
10/100/1000Mbps Gigabit Ethernet PC Card User Guide
3
Chapter 2 Installation
2.1 Hardware Installation
To install the Card, follow these steps as below:
Step 1: Locate an available CardBus slot on your laptop.
Step 2: With the connector pin end facing the CardBus slot and the label facing up, slide the
Card into the CardBus slot until it locks in place.
Step 3: The promoted Found New Hardware Wizard screen will pop up when the adapter is
installed correctly.
)
Note:
After you have inserted the Card in your laptop, you should install the driver for the Card. The
CD-ROM provides the drivers for Win9x/ME/2000/XP/Vista. You should select the appropriate
driver for your system. The following installation will take Windows XP for example, and you can
install drivers for other systems similarly.
2.1.1 Install driver for XP
Step 1: After you install the Card correctly, the Operating
System
will
automatically recognize it,
then the “Welcome to the Found New Hardware Wizard” screen will appear (shown in
Figure 2-1). Select
No, not this time
, then click
Next
.
