TD-8817B
ADSL2+ Modem Router User Guide
9
Step 4:
Configure the IP address as Figure 3-4 shows. After that, click
OK
.
Figure 3-4
)
Note:
You can c
onfigure the PC to get an IP address automatically, select “Obtain an IP address
automatically” and “Obtain DNS server address automatically” in the screen above.
Now, you can run the Ping command in the command prompt to verify the network connection.
Please click the
Start
menu on your desktop, select
run
tab, type
cmd
or
command
in the field
and press
Enter
. To continue, please type
ping 192.168.1.1
on the following appeared command
prompt screen and then press
Enter
.
If the result displayed is similar to the screen below, the connection between your PC and the
Router has been established.
Figure 3-5
