TD-8817
ADSL2+ Ethernet/USB Modem Router User Guide
21
Note:
Each IP address entered in the fields must be in the appropriate IP form, which is four IP octets
separated by a dot (x.x.x.x), such as 192.168.1.100. The modem router will not accept the IP
address if it is not in this format.
3. PPPoA/PPPoE
Select this option if your ISP requires you to use a PPPoE connection. This option is typically
used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your
PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoE connection.
Please enter the information accordingly.
Figure 4-9
Service name:
Specify a name for the PPPoA/PPPoE connection for recognition.
Username:
Enter your username for your PPPoA/PPPoE connection to identify and verify
your account to the ISP.
Password:
Enter your password for your PPPoA/PPPoE connection.
Encapsulation:
For both PPPoA/PPPoE connection, you need to specify the type of
Multiplexing, either LLC or VC Mux.
Bridge Interface:
Activate the option, the modem router can also work in Bridge mode.
Connection:
For PPPoA/PPPoE connection, you can select
Always on
or
Connect
on-Demand
or
Connect Manually
. Connect on demand is dependent on the traffic. If there
