TD-8610
External ADSL MODEM User Guide
Chapter 2: Hardware Installation Guide
2.1 System requirement
Confirm your computer has been installed with networking interface card (NIC) before
connecting ADSL MODEM to your computer, with operating system supporting the
TCP/IP protocol.
2.2 LED explanation
The panel of ADSL MODEM includes one power button, one power indicator (RED) and
four function indicators (GREEN), and these five indicators are explained as chart 1-1:
Indicator Description Status
Function
Details
PWR Power
On
Off
Power OK
Power fail
ADSL ADSL
status
Slow flash
Quick flash
On
Self-detecting when power up
Connecting to the telecom network
Connection to telecom network OK
ALARM Mistake
On
Off
There is mistake when ADSL transmitting
data or receiving data
ADSL normal
ACT Data
On
Off
There is data transmitting or receiving on
WAN port
No data transmitting or receiving on WAN
port
LAN Ethernet
On
Off
Flash
LAN port normal
Connection on LAN port abnormal
Data transmitting or receiving on LAN port
Chart 1-1
2.3 Rear-panel
ON/OFF:
Turn on/off the ADSL MODEM’s power.
Power (9VAC/0.8A input)
: please do not use any unknown power adaptor,
otherwise that may damage your ADSL MODEM.
RESET(reset default)
: First press push the reset button of MODEM, then turn on
the MODEM’s power about three minuters. It will utilize the default manufacturer’s
setting.
LAN:
Connect with your computer’s NIC.
LINE(WAN)
: Connect to the MODEM of Splitter or Connecting the telephone line.
- 4 -
Содержание TD-8610
Страница 1: ......