Configuration Guide
166
Configuring Authentication
RADIUS Authentication Configuration
3
RADIUS Authentication Configuration
To configure RADIUS Authentication, follow the steps:
1) Configure the authentication page.
2) Specify the external RADIUS server and configure the corresponding parameters.
3.1 Configuring RADIUS Authentication
Choose the menu
Authentication
>
Authentication Settings
>
Web Authentication
to
load the following page. Please make sure that the Authentication Type is configured as
Radius Authentication.
Figure 3-1 Configuring RADIUS Authentication
Follow these steps to configure RADIUS Authentication:
1) In the
Settings
section, enable the authentication status, configure the idle timeout and
portal authentication port.