Method 2: Via a Web Browser
Method 1: Via the Tether App
1.
Connect your computer or smartphone to the extender’s network
.
If you are
using a computer, unplug the Ethernet cable if any.
2.
Launch a web browser, enter
http://tplinkrepeater.net
in the address bar, and
log in.
Note:
If the login window does not appear, refer to
FAQ
>
Q1
.
3.
Manage the extender as needed.
1.
Connect your smartphone to the extender‘s or router’s network.
2.
Launch the Tether app, select your extender, and log in.
3.
Manage the extender as needed.
Manage the Extender
LED Explanation
LED
Status
Indication (For Range Extender Mode)
The extender is connected or not connected to the 5GHz
wireless network of your router.
5GHz
On/Off
The extender is connected or not connected to the 2.4GHz
wireless network of your router.
2.4GHz
On/Off
The extender is on or off.
The system is starting up or firmware upgrade is in progress.
POWER
On/Off
Blinking
The extender is connected to your router’s wireless
network and is in a suitable location.
The extender is receiving a weak signal. Try relocating it
closer to your router.
WPS connection is in progress.
No wireless connection is established.
(Signal)
Solid blue
Solid red
Blinking
Off
Q1. What should I do if I cannot access the extender’s web
management page?
Make sure your computer or smartphone has connected to the extender’s
network, and not that of your router. If your router and extender share the same
network name, connect your computer to the extender via an Ethernet cable, or
use the Tether app.
If you are using a computer, make sure it is set to obtain an IP address and DNS
server address automatically.
Verify that
http://tplinkrepeater.net
or
http://192.168.0.254
is correctly entered
in the web browser and press
Enter
. Note that
http://192.168.0.254
applies only
for extenders with factory default settings.
Use another web browser and try again.
Reboot or reset the extender and try again.
If you are still having problems, contact our technical support.
Q2. What should I do if the LED doesn’t turn solid on after
completing setup via the Tether app or web browser?
You may have entered incorrect Wi-Fi passwords for your host networks during
the configuration. Check the passwords and try again.
Make sure the extender is close to your router, preferably within 16 feet, and
away from large electrical appliances.
If you have enabled wireless MAC filtering, wireless access control, or access
control list (ACL) on your router, disable them first, then follow any method on the
front page to complete the configuration.
Try setting up via the WPS button.
Reset the extender and go through the configuration again.
If you are still having problems, contact our technical support.
Q3. How do I reset the extender?
With the extender powered on, use a pin to press the
Reset
button for 1 second.
The extender will reboot.
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device.
Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and
(EU) 2015/863. The original EU declaration of conformity may be found at
https://www.tp-link.com/en/ce.
Reset
For technical support, the user guide and other information, please
visit
https://www.tp-link.com/support
, or simply scan the QR code.
If you have any suggestions or needs on the product guides, welcome to email
.
To ask questions, find answers, and communicate with TP-Link users or engineers,
please visit
https://community.tp-link.com
to join TP-Link Community.
Tether
http://tplinkrepeater.net
http://tplinkrepeater.net
Note:
If your extender and router use the same network name, Method 1 is recommended.
After setup, you can manage the extender via any of the methods below. You
can reselect host network, change extended network settings and more.
POWER
Signal
2.4GHz
5GHz
Button Explanation
LED button:
Press for 1 second to turn on or turn off all LEDs.
Power button:
Press for 1 second to turn on or turn off the extender.
