TP-Link PSM150-AC, Руководство по установке, Страница: 6 / 16


Note:
For safety considerations, the above process are
recommended by TP-Link, however, PSM150-AC can also
support installation or removal when the AC power supply is
on.
2.1 Safety Information
To avoid damage to the power supply module and the
equipment and bodily injury, please observe the following
notes:
•
When you install and remove the power supply module,
please wear an ESD-preventive wrist strap, and make sure
that it has good skin contact and is well grounded.
•
Before installing the power supply module, make sure that
the voltage of external power supply system is the same
with the voltage marked in the power supply module, and
the output voltage of the power supply module is the
same with the required voltage of the powered devices in
order to prevent damaging the power supply module or
the powered devices.
•
Do not touch any exposed wires or terminals to avoid
bodily injury.
•
Do not place the power module in a humid place or let the
liquid into the power supply module.
•
If there is a failure inside the module, please contact
service personnel, instead of opening the housing of the
module.
5