Wi-Fi
Wi-Fi
TP-Link_Extender
CHOOSE A NETWORK...
Other...
< Settings
My Devices
Local Device
RExxx
XX-XX-XX-XX-XX-XX
Q1. What should I do if the Tether app cannot find my device?
Try another method by following the steps below:
1.
Connect your smartphone to the extender’s network
TP-Link_Extender
.
2.
Launch the Tether app, and select your extender.
Tip:
If you have connected to the extender’s Wi-Fi but still cannot find your device, turn off
your cellular data.
3.
Follow app instructions to complete the setup.
If you are still having problems, contact our technical support.
Q2. What should I do if the LED doesn’t turn solid on after
completing setup via the Tether app or web browser?
You may have entered incorrect Wi-Fi password for your host router during the
configuration. Check the password and try again.
Make sure the extender is close to your router, preferably within 16 feet, and away
from large electrical appliances.
If you have enabled wireless MAC filtering, wireless access control, or access
control list (ACL) on your router, disable them first, then follow any method on the
front page to complete the configuration.
Try setting it up via the WPS button.
Reset the extender and go through the configuration again.
If you are still having problems, contact our technical support.
Q3. How do I reset the extender?
With the extender powered on, use a pin to press the
Reset
button for 1 second.
The extender will reboot.
Method 2: Via a Web Browser
1.
Connect your computer or smartphone to the extender’s network. If you are
using a computer, unplug the Ethernet cable if any.
2.
Launch a web browser, enter
http://tplinkrepeater.net
in the address bar, and
log in.
3.
View or change extender settings as needed.
Method 1: Via the Tether App
1.
Connect your smartphone to the extender‘s or router’s network.
2.
Launch the Tether app, select your extender, and log in.
3.
View or change extender settings as needed.
Access Extender Settings
After setup, you can access extender settings via any of the methods below.
You can reselect host network, change extended network settings and more.
Note:
If your extender and router use the same network name,
Method 1
is recommended.
LED Explanation
LED
Status
Indication (For Range Extender Mode)
The extender is connected or not connected to the
5GHz wireless network of your host router.
5GHz
On/Off
The extender is connected or not connected to the
2.4GHz wireless network of your host router.
2.4GHz
On/Off
The extender is on or off.
The system is starting up or firmware upgrade is in progress.
(Power)
On/Off
Blinking
The extender is connected to your router’s wireless
network and is in a suitable location.
The extender is receiving a weak signal. Try relocating it
closer to your router.
WPS connection is in progress.
No wireless connection is established.
(Signal)
Solid white
Solid red
Blinking
Off
TP-Link OneMesh router and extenders work together to form one unified Wi-Fi
network. Walk through your home and stay connected with the fastest possible
speeds thanks to OneMesh’s seamless coverage.
OneMesh
TM
with Seamless Roaming
Seamless Roaming
Devices automatically switch between your router and extenders as you move through your
home for the fastest possible speeds.
Unified Wi-Fi Network
Router and extenders share the same wireless settings, including network name, password,
access control settings and more.
Easy Setup and Management
Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the
Tether app or at your router’s web management page.
To check full list of TP-Link OneMesh devices, scan the QR code,
or visit
https://www.tp-link.com/One-Mesh/compatibility
.
INTERNET
SAME
Network Name & Password
for seamless roaming
Res
et
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.
The original EU Declaration of Conformity may be found at
https://www.tp-link.com/en/support/ce
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at
https://www.tp-link.com/support/ukca
For technical support, replacement services, user manuals and other information,
please visit
https://www.tp-link.com/support
, or simply scan the QR code.
If you have any suggestions or needs for our product guides, you are welcome
to email
.
To communicate with TP-Link users or engineers, please join the TP-Link Community
at
https://community.tp-link.com
.
Safety Information
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device. Please use this
product with care and operate at your own risk.
If you need more setup help, please visit
https://www.tp-link.com/support/faq/3074/
, or simply scan the QR code.
AC750/AC1200 Wi-Fi Range Extender
Model:
RE230/RE330