TP-Link JetStream TXM431 Series SFP+, Руководство по установке

Страница: 7 / 12

2

Duplex mode supported

Hot-swappable
Chapter 2 Installation
2.1 Installing the SFP+ Transceiver

Note:

Installing or removing the SFP+ transceiver with fiber-optic cables still
attached to it may damage cables and cable connectors. Please
disconnect all cables before removing or installing an SFP+ transceiver.

Remove and insert SFP+ transceiver if necessary. Removing and installing
an SFP+ transceiver frequently can shorten its service life.

As the SFP+ transceivers are static-sensitive devices, be sure to wear an
ESD wrist strap when installing or removing a transceiver. Do not touch the
output pins on the transceiver with your hand.
Step 1: Wear an ESD-preventive wrist strap, and make sure the
wrist strap has good skin contact and is well grounded.
Step 2: Insert the SFP+ transceiver into an SFP+ slot, as shown
in Figure 1.
Figure 1
Step 3: Press the transceiver into the slot firmly until you feel the
transceiver latch into place.
SFP+