VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
206
Ejcrvgt"49" Enwuvgt"Eqoocpfu"
Cluster Management function enables a network administrator to manage the scattered devices in
the network via a management device. After a commander switch is configured, management and
maintenance operations intended for the member devices in a cluster is implemented by the
commander device.
enwuvgt"pfr
"
Fguetkrvkqp"
The
enwuvgt"pfr
command is used to configure NDP globally. To return to the
default configuration, please use
pq" enwuvgt" pfr
command. NDP (Neighbor
Discovery Protocol) is used to discover the information of the directly connected
neighbor devices to support cluster establishing. An NDP-enabled device sends
NDP packets regularly to neighbor devices as well as receives NDP packets
from neighbor devices. An NDP packet carries the aging time, which indicates
the period of the receiving devices to keep the NDP packet.
U{pvcz"
enwuvgt"pfr" "
enwuvgt"pfr
vkogt"
{
"
[
jgnnq"
hello-time
] [
cikpi
aging-time
] }
"
pq"enwuvgt"pfr
pq"enwuvgt"pfr
vkogt"
{
"
[
jgnnq"
hello-time
] [
cikpi
aging-time
] }
"
Rctcogvgt"
hello-time
—— Hello Time, which is the interval to send NDP packets. Hello
Time ranges from 5 to 254 in seconds. By default, it is 60. Hello Time should be
smaller than Aging Time.
aging-time
—— Aging Time, which is the period for the neighbor switch to keep
the NDP packets from this switch. Aging Time ranges from 5 to 255 in seconds.
By default, it is 180.
Eqoocpf"Oqfg"
Global Configuration Mode
