VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
7
Now, you can logon by Telnet in
nqikp"nqecn"
mode.
1. Make sure the switch and the PC are in the same LAN. Click
Uvctv
→
Twp
to open the
"Twp
window and type
eof
in the prompt Run window as Figure 1-7 and click
QM
.
Figure 1-7 Run Window
2. Open Telnet, then type
"vgnpgv"3;4038:0203"
in the command prompt
"
shown as Figure 1-8, and
press the
Gpvgt
button.
Figure 1-8 Connecting to the Switch
3. Type the default user name and password
cfokp1cfokp."
then press the
"Gpvgt
button so as
to enter User EXEC Mode.
Figure 1-9 Enter into the User EXEC Mode
Now you can manage your switch with CLI commands through Telnet connection.
