VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
151
twng"
Fguetkrvkqp"
The
twng
command is used to configure MAC ACL rule. To delete the
corresponding rule, please use
pq"twng
command.
U{pvcz"
twng
rule-id
{ deny | permit } [ [
uoce
source-mac
]
uocum
source-mac-mask
]
[ [
foce
destination-mac
]
focum
destination-mac-mask
] [
xkf
vlan-id
] [
v{rg
ethernet-type
] [
rtk
user-pri
] [
vugi
time-segment
]
pq"twng
rule-id
"
Rctcogvgt"
rule-id
—— The rule ID.
deny —— The operation to discard packets.
permit ——The operation to forward packets. By default, it is “permit”.
source-mac
—— The source MAC address contained in the rule.
source-mac-mask
—— The source MAC address mask. It is required if you
typed the source MAC address.
destination-mac
—— The destination MAC address contained in the rule.
destination-mac-mask
—— The destination MAC address mask. It is required if
you typed the destination MAC address.
vlan-id
—— The VLAN ID contained in the rule, ranging from 1 to 4094.
ethernet-type
—— EtherType contained in the rule, in the format of 4-hex
number.
user-pri
—— The user priority contained in the rule, ranging from 0 to 7. By
default, it is not limited.
time-segment
—— The time-range for the rule to take effect. By default, it is not
limited.
Eqoocpf"Oqfg"
Mac Access-list Configuration Mode
Gzcorng"
Create a MAC ACL whose ID is 20, and add Rule 10 for it. In the rule, the source
MAC address is 00:01:3F:48:16:23, the source MAC address mask is
11:11:11:11:11:00, VLAN ID is 2, the user priority is 5, the time-range for the rule
to take effect is tSeg1, and the packets match this rule will be forwarded by the
switch:
