13
OLT(config)
# interface ge
OLT(interface-ge)
# vlan mode 9 hybrid
OLT(interface-ge)
# vlan hybrid 9 tagged 100
ge9: hybrid add tag vlan:
Fail: 0, Success: 1
3
、
Configure PON port vlan
Add PON port PON4 to VLAN 100 and set Ethernet port 1 native-vlan as 100.
OLT(config)
# interface gpon
OLT(interface-gpon)
# vlan mode 4 hybrid
OLT(interface-gpon)
# vlan hybrid 4 tagged 100
OLT(interface-gpon)
# port vlan native-vlan 4 1 eth 1 vlan 100
4
、
Binding the traffic profile
To restrict the Ethernet port 1’s upstream and downstream data as the traffic profile set before.
OLT(interface-gpon)
# ont port car 4 1 eth 1 inbound 123 outbound 123
5
、
Save the data.
OLT(config)
# save
Configure the ONT on the Web page. (Please reference of the user manual of
4FE+1POTS+WIFI )
Log in to the Web page and then configure the ONT on the Web page
：
1
、
Configure the IP address of the PC network adapter to be in the same network segment with the
IP address of the local maintenance Ethernet port on the ONT (default: 192.168.100.1).
2
、
Open the Web browser, and enter the IP address of the local maintenance Ethernet port on the
ONT. In the login window, enter the user name (default: CUAdmin) and password (default:
CUAdmin) of the administrator. After the password is authenticated, the Web configuration window
is displayed.
3
、
Configure parameters of a WAN port.
4
、
Click Advance Setup
WAN
ADD, to add a WAN connection
Select an interface in WAN service interface configuration( For example: veip0.2), then click
next.
