61
Chapter 4
5. Select your local
time zone
.
6. Enter the address or domain of the
NTP Server I
or
NTP Server II
.
7. Click
Get GMT
to get time from the Internet if you have connected to the Internet.
¾
To set Daylight Saving Time:
1. Select
Enable DaylightSaving
.
2. Select the start time from the drop-down list in the
Start
field.
3. Select the end time from the drop-down list in the
End
field.
4. Click
Save
.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.
4. 16. 2. Diagnostic
Diagnostic is used to test the connectivity between the router and the host or other
network devices.
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the router.
2. Go to
System Tools
>
Diagnostic
.
•
Diagnostic Tool
- Select one diagnostic tool.
•
Ping
- This diagnostic tool troubleshoots connectivity, reachability, and name
resolution to a given host or gateway.
•
Tracerouter
- This diagnostic tool tests the performance of a connection.
Содержание Archer C50(EU)3.0
Страница 1: ...REV3 0 0 1910012069 User Guide AC1200 Wireless Dual Band Router Archer C50 EU 3 0...
Страница 13: ...Chapter 3 Login This chapter introduces how to log in to the web management page of router...
Страница 70: ...67 3 Click LAN settings and deselect the following three options and click OK...