TP-Link Archer AX55 Скачать руководство пользователя страница 117 | Manualshive

Страница: 117 / 122

background image

113

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference

that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.
We,

TP-Link USA Corporation

, has determined that the equipment shown as

above has been shown to comply with the applicable technical standards, FCC

part 15. There is no unauthorized change is made in the equipment and the

equipment is properly maintained and operated.

Issue Date: 2021-06-18

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause

radio interference, in which case the user may be required to take adequate

measures.

OPERATING FREQUENCY(the maximum transmitted power)

2400 MHz -2483.5 MHz (20dBm)
5150 MHz -5250 MHz (23dBm)
5250 MHz -5350 MHz (23dBm)
5470 MHz -5725 MHz (30dBm)

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of directives 2014/53/EU, 2009/125/

EC, 2011/65/EU and (EU)2015/863.

«
...
115
116
117
118
119
...
»

Содержание Archer AX55



























































































































Отзывы:

Нет отзывов

Похожие инструкции для Archer AX55

Бренд: D-Link Страницы: 10

Бренд: Vanguard Страницы: 121

Бренд: BandLuxe Страницы: 67

Бренд: Patton electronics Страницы: 2

Бренд: Patton electronics Страницы: 86

Magic WiFi mini Ek

Бренд: Devolo Страницы: 22

Бренд: NEC Страницы: 2

4-Port 10/100Mbps Ethernet Broadband Router

Бренд: AOpen Страницы: 41

Бренд: Lucent Technologies Страницы: 20

Бренд: TRENDnet Страницы: 10

Бренд: Caen Страницы: 14

D-NVR4108HS-4KS2/L

Бренд: Dahua Страницы: 33

Бренд: DIGIWEB Страницы: 16

Slideaway CL1008

Бренд: ATEN Страницы: 77

ipRocketLink IAD 3086

Бренд: Patton electronics Страницы: 12

Monochrome Image Acquisition Device NI 1410

Бренд: National Instruments Страницы: 34

Бренд: KYLAND Technology Страницы: 19

Бренд: MICRADIGITAL Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды