Toyotomi Zibro LC-135, Руководство по эксплуатации

Страница: 25 / 168

4
13
Transportation
cap
N
P
TRANSPORTATION
Take the following measures to avoid fuel leakage during the transportation of
the heater:
1 Let the heater cool down.
2 Remove the removable tank from the heater and remove the fuel filter
(refer to Section N, Fig. M).
Some drops may leak from the filter keep a cloth
at hand. Store the fuel filter and the removable tank outside the heater.
3 Place the transportation cap into the position of the fuel filter ( ig. N).
Press it tight. The transportation cap ill, as much as possible, prevent oil
leakage from the heater during transport.
4 Al ays move the heater in an upright position.
5 Make the fixed tank empty with a fuel pump before transportation or in case
of rong or dirty fuel. irst remove the fuel filter and then insert the fuel
pump into the empty fi ed tank. ollo the same procedure if the fuel tank
contains water.
Q
SPECIFICATIONS
Ignition electrical imensions (mm) idth 35
uel paraffin including base plate: depth 315
Capacity (kW) ma . 3.50 height 3
Capacity (kW) min. 1.05 Accessories: - manual fuel pump
Suitable space (m
3
)
**
5 -1 0 - transportation cap
uel consumption (l/hr)
*
0.3 5 Mains 230 V
-- AC / 50 H
uel consumption (g/hr)
*
292 Electrical consumption:
Burning time per tank (hr)
*
20.8 - igniter 320 W
Capacity removable tank (litres) . - continuous 2 W
Weight (kg) 11.5 use rating 250V, 5A
At ma imum setting Specified values are indicative