Toyotomi UTG-18AP, Руководство пользователя

Страница: 83 / 180

83
GB
“TIMER OFF” button can set the time for timer on. After pressing this button,
icon disappears and the word “OFF” on remote controller blinks. Press
c
or
d
button to adjust TIMER OFF setting. After each pressing
c
or
d
button,
TIMER OFF setting will increase or decrease 1 minute. Hold
c
or
d
button,
2 seconds later, the time will change quickly until reaching your required time.
Press “TIMER OFF” to con
fi rm it. The word “OFF” will stop blinking. icon
resumes displaying. Cancel TIMER OFF: Under the condition that TIMER OFF
is started up, press “TIMER OFF” button to cancel it.
Note:
• Under on and off status, you set TIMER OFF or TIMER ON simultaneously.
•
Before setting TIMER ON or TIMER OFF, please adjust the clock time
properly.
11 CLOCK button
Press this button to set clock time. icon on remote controller will blink.
Press
c
or
d
button within 5 seconds to set clock time. Each pressing of
c
or
d
button, 2 seconds later, time will change quickly. Release this button when
reaching your required time. Press “CLOCK” button to con fi rm the time. icon
stops blinking.
Note:
• Clock time adopts 24-hour mode.
•
The interval between two operation cannot exceed 5 seconds. Otherwise,
remote controller will quite setting status. Operation for TIMER ON/ TIMER
OFF is the same.
12 QUITE button (not available)
Press this button, the Quiet status is under the Auto Quiet mode and displays
and “AUTO” signal. Quiet mode displays signal and during Quiet OFF
there is no signal displayed. After powered on, the Quiet OFF is defaulted.
Note:
• The Quite function is only available for some models.
13 WIFI button
Press “WiFi” button to turn on or off WiFi function. When WiFi function is turned
on, “WiFi” icon will be displayed on remote controller. Under status of unit off,
press “MODE” and “WiFi” buttons simultaneously for 1 second. WiFi module
will restore to factory default setting.