Toyotomi TKN/TKG-A528DV, Руководство пользователя

Страница: 49 / 60

49
GB
SPLIT TYPE ROOM AIR CONDITIONER
• A noise may be heard due to louver restoring to its original position when power is fi rst
turned on.
14. Dust is blown out of the indoor unit.
• This is normal when the air conditioner has not been used for a long time or during the fi rst
use of the unit.
15. A peculiar smell comes out of the indoor unit.
• This is caused by the indoor unit giving off smells permeated from building material, from
furniture or smoke.
16. The air conditioner turns to FAN only from COOL or HEAT (for cooling and heating
models only) mode.
When indoor temperature reaches the temperatures setting on air conditioner, the
compressor will stop automatically and the air conditioner turns to FAN only mode. The
compressor will start again when the indoor temperature rises on COOL mode or falls on
HEAT mode (For cooling and heating models only) to set point.
17. Dripping water may generate on the surface of the indoor unit when cooling in a high
relatively humidity (relative humidity higher than 80%). Adjust the horizontal louver to the
maximum air outlet position and select HIGH fan speed.
18. Heating Mode (For Cooling/Heating models only)
The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit during
heating operation. When the outdoor temperature falls, heat drawn in by the air conditioner
decreases accordingly. At the same time, heat loading of the air conditioner increases due to
larger difference between indoor and outdoor temperature. If a comfortable temperature can’t be
achieved by the air conditioner, we suggest you to use a supplementary heating devise.
19. AUTO-RESTART Function.
Power failure during operation will stop the unit completely. For the unit without Auto-restart
feature, when the power restores, the OPERATION indicator on the indoor unit starts
fl ashing.
To restart the operation, push the ON/OFF button on the remote controller. For the unit with Auto-
restart feature, when the power restores, the unit restarts automatically with all the previous
settings preserved by the memory function.
20. Lighting or a car wireless telephone operating nearby may cause the unit to malfunction.
Disconnect the unit with power and then re-connect the unit with power again. Push the ON/OFF
button on the remote controller to restart operation.