Toyotomi TDN/TDG-A28VR5, Руководство пользователя

Страница: 11 / 80

11
B GB
Introduction for buttons on remote controller
Remote Controller Description
ON/OFF:
the unit.
MODE
Each time you press this button, a mode is selected in a sequence that goes from AUTO, COOL,
DRY, FAN, and HEAT *, as the following:
*Note: Only for models with heating function.
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not
be displayed on the LCD, and the unit will automatically select the suitable operation
mode in accordance with the room temperature to make indoor room comfortable.
Press this button to decrease set temperature. Hold it down for above 2 seconds to
rapidly decrease set temperature. In AUTO mode, set temperature is not adjustable.
+
Press this button to increase set temperature. Hold it down for above 2 seconds to
rapidly increase set temperature. In AUTO mode, set temperature is not adjustable.
FAN
This button is used for setting Fan Speed in the sequence that goes from AUTO,
, to then back to Auto.
Auto
Low speed Medium speed High speed
t
Press button to start or stop up & down swing function.The remote controller defaults to
simple swing condition.
t Press + button and button at the same time at unit OFF to switch between
simple swing and static swing; blinks for 2 seconds.
t In static swing condition, pressing button, the swing angle of up & down louver
changes as below:
1
2
3
4
5
6