Toyotomi SmartCube, Руководство пользователя

Страница: 28 / 36

28
GB
FAN SPEED . HIGH › LOW and AUTO
If «AUTO» is selected during cooling function the fan speed will automatically be adjusted
to HIGH or LOW according to the difference between settings and ambient temperature.
TIMER Press the icon to select your desired operation time periods.
Use the TIMER button to turn on / off the unit after the set time is over.
You can only set the auto-shut off timer while the unit is operating (on)
You can only set the auto-start timer while the unit is in standby (off)
You can set the function and fan speed while setting the timer.
Pressing the POWER key before count down turns the unit on or off will clear the settings
AIR CONDITIONER MODE Select the air conditioner mode from function button.
Use TEMP- and TEMP+ keys to set temperature in air conditioning mode. Those keys increment
or decrement the preset temperature by 1
℃ each time they are pressed within the 17- 30 ℃
range. SmartCube is a fully climate control Air Conditioner. If temperature in the room is higher
than set temperature the micro-computer will start the compressor, cooling down.
Also AUTO function can be set for easy operation.
You can use SmartCube as personal / spot air cooler with cold air blowing through the swinging
louvres and hot air coming through the back. Please note that in this mode the temperature
in the room will not be reduced. We recommend venting the air conditioner with the vent kit
supplier through the wall or through the window and using it in a room of appropriate size.
Note: When in air conditioning please make sure the rubber water stopper (14) is in place
to ensure maximum cooling and ef fi ciency. Your SmartCube is an advanced self-evaporative
air conditioner, which reduces the need to empty the water tank in cooling mode. If the unit
is vented correctly most of the water is reused to cool the condenser coils and any excess is
evaporated. Please do not use continuous drainage if you intend to use the self-evaporating
facility for improved cooling effect.
DEHUMIDIFIER MODE
Select the dehumidi fi er mode from function button. The multifunctional air treatment unit
contains an intelligent micro-computer that will ensure humidity is measured exactly and is able
to maintain a constant humidity dehumidifying with minimum energy expense.
When ambient humidity is lower than set humidity by 2%, compressor will stop automatically
for 3.5 minutes saving energy. The micro-computer will measure the humidity and restart the
compressor only the ambient humidity is higher than set humidity by 2%.
HUMIDITY SETTINGS (HUM-, HUM+)
CO(continuous)
Æ
30%
Æ
35%
Æ
40%
Æ
45%
Æ
50%
Æ
55%
Æ
60%
Æ
65%
Æ
70%
Æ
75%
Æ
80%
Æ
85%
Æ
90%
Æ
CO
Multifunctional Unit 5 in 1