Toyotomi SENSEI Series, Руководство пользователя

Страница: 43 / 60

43
GB
DEHUMIDIFIER
dry shoe
components water tank
handle Four
casters
INSTALLATION
A: First remove the accessory from the tank
First remove the water tank open the cover out of the water tank in the dry
shoe components, water tank handle and four casters and other accessories.
B: Install the tank handle and cover Tilt
the handle at a certain angle, align
the protrusions on the handle with the tank
slot, and install the handle on the tank.
Then cover the tank cover and replace the
tank with the machine.
C: Install dehumidi fi er casters
To tilt the dehumidi fi er, note that the tilt
angle cannot exceed 45°. Insert the iron
plate on the pulley into the mounting slot
to ensure full insertion.
NOTE: After the installation of the casters is completed, it is recommended to
stand for 2 hours and then use the boot.