Toyotomi RCA-37 Скачать руководство пользователя страница 6

Fuel gauge

1. Open the fuel tank lid on the top of heater cabinet and lift out the removable fuel 

tank. Turn the removable tank upside down and remove the fuel tank cap.

2. Insert the straight tube of the manual siphon into the kerosene container. Insert 

the siphon’s flexible hose into the removable fuel tank opening.

3. Turn the air vent knob on the top of the siphon clockwise to close the vent. Start 

the flow of kerosene by squeezing the bulb of the siphon vigorously six or seven 
times. Once flow begins, it is no longer necessary to squeeze the bulb.

4. Watch the fuel gauge on the removable tank to avoid overfilling. When it shows 

half, stop flow by turning the air vent knob counterclockwise.

NOTE: Be careful to avoid overfilling the tank, especially with very cold kerosene. 

Overflow might occur due to expansion when the fuel warms up.

5. Remove the siphon carefully, allowing excess kerosene to drain from the tube back into the container. Replace 

fuel tank cap and tighten it securely. Be sure to wipe away any spilled kerosene from tank and other heater parts.

6. After making sure fuel tank cap is tightly fastened, invert tank and replace into heater body.

CHECK BEFORE LIGHTING

1. LEVEL THE HEATER

The heater should be operated on a firm, level floor.

NOTE: If your heater is not level, change locations.

DO NOT prop it with books or other objects.

2. ENGAGE THE AUTOMATIC EXTINGUISHER

The automatic extinguisher is engaged automatically by turning the wick adjuster 
knob clockwise.

LIGHTING

NOTE: When you first use yo

outside protected fro
on the burner parts. 
This procedure is nec

NOTE: If you have fueled y

for a long time, you

1. Turn the wick adjuster kno

It makes a spark discharg
the wick adjuster knob clo
As the wick rises within 
resistance and makes a s
reached its proper height, 
The wick adjuster knob ca

2. LIGHTING WITH A MATCH

You should not have to 
necessary, open the grille, 
touch the match to the top
DO NOT allow burned part

NOTE: To restore the automa

batteries.

3. Be sure that heat chambe

right. If the movement is c
not seated properly.

NOTE:  An improperly seate

potential damage to 
DO NOT leave the he
normally, which will b

5

RCA-37WX_US.qxd  15.10.22 10:25   ページ 5

Содержание RCA-37

















Отзывы: