Toyotomi ORA Series, Руководство пользователя

Страница: 38 / 44

38
GB
DEHUMIDIFIER
EMPTY THE WATER TANK (Fig. D)
When the water tank is full, the Full lamp (C6) will light and unit stops in a few
minutes.
NOTE: DO NOT move the unit or remove the water tank, if the unit is still
operating, as water may leak, damage the unit or cause an electric shock.
2.
By gripping the bottom of the bucket, remove the water tank (D1) and lift
carefully with handle (D2).
3. Remove the cover of water tank fi rst (D3), then pour the water away (D4).
Clean the water tank and restore the cover and the water tank (D5) (D6) to
correct position.
NOTE:
•
Clean the water tank with clean water if needed. DO NOT use solvent,
abrasive or hot water.
• DO NOT remove or damage the fl oat in the tank, or the unit cannot work
correctly.
• The water tank cover must be well fi tted in position.
• The water full indicator lamp lights if the water tank is not well in the position.
CLEANING
CLEANING AIR INTAKE GRILLE (Fig. I)
If the fi lter is covered with dust, the air fl ow and the performance of the unit will
be affected. It is recommended to check and clean the air fi lter every 2 weeks.
1. Turn off the unit and remove the fi lter from the unit. (I1)
2. Clean the Nano-silver pre fi lter with a vacuum cleaner or wash with water
(under 40
o
C) (I2). If you wash with water, dry it completely at shaded area.
3. Replace the fi lter in position.
CLEANING SURFACE
1. Turn off the unit, wait for the fan to stop and unplug from the power socket.
2. Clean the surface with a soft damp cloth.
3. Dry thoroughly with a soft towel after cleaning.
4.
In order to avoid damage, do not wash the unit with water, or let water drip
into the air inlet or outlet.