7
NOTE: The standard setting of the heater is 20
°
C. However, once the set temperature
has been changed the new setting will remain in effect unless changed.
NOTE: Room temperature measurements are taken directly behind the heater.
These measurements may not represent the true room temperature.
SAVE OPERATION
The “SAVE” function allows you to limit the temperature. When
this function is activated, the heater will automatically switch off,
when the room temperature exceeds the set temperarure by 3˚C.
Subsequently, when the room temperature has dropped again
to the set temperature, the heater will automatically switch on
again. Activate the “SAVE” setting by pressing the Save key.
The Save indicator will light up. Switch off the function by
pressing the Save key once again.
NOTE: Without the “SAVE” setting your heater will maintain the set temperature by
approximation as well, by adjusting its heating capacity. “SAVE” is an economy
setting, which you can use when, for instance, you are not present in the room
or to keep it frost-free.
CHILDPROOF LOCK
The childproof lock can be used to prevent children accidentally
changing the heater settings. When the heater is burning and
the childproof lock is on, the heater can only be switched off.
Other functions are blocked then. If the heater has already been
switched off, the childproof lock also prevents accidental
ignition of the heater.
Activate the childproof lock by pressing the Key-lock button and holding it down for
more 3 seconds. The Key-lock indicator will light up indicating that the childproof lock
has been activated. Switch off the childproof lock by pressing the Key-lock button and
holding it down for more than 3 seconds once again.
VENTILATION INDICATOR
When the VENT indicator starts blinking, this is a sign that the
room is not vented sufficiently. The heater will switch off
automatically. If the indicator continues blinking after extra
ventilation, please contact your dealer.