Toyotomi FS1060A, Руководство по обслуживанию

Страница: 11 / 28

¾
If the controller is under heating mode, the preset temperature will be decreased by 1 one hour after running under ć
sleep mode and will be decreased by another 1 after two hours. The temperature wi
ć
ll decreased by 2 within two
ć
hours. After that, the unit will run at this temperature.
No sleep function under fan mode or auto mode.
Timer function
Timer ON
TIMER ON
function
can be set
when the unit is
at off mode
. At the time for Timer ON , the controller will run under
preset mode. The interval of time setting is 0.5h and can be set within 0.5-24h r .
Timer OFF
TIMER OFF function can be set when the unit is at on mode . At the time for Timer OFF , the system will be stopped.
The interval of time setting is 0.5h and can be set within 0.5-24h r .
Swing Control
You can control its ON and OFF by using the swing button . The swing is valid only when the indoor fan is running.
Buzzer
When the controller is energized or receives correct signal from press button , the buzzer will give out a beep.
Indicator control
Defrosting; Antifreeze Protection; Compressor high pressure protection; Compressor low pressure protection;Exhaust
pipe high temp. protection; forcible cooling; forcible heating.
The indicator will make a blink when the controller is just energized. The indicator will blink under any condition as below:
Powe r -off Memory
Memory content:mode, swing,timer,preset temp.,preset fan speed.
After the power is failed, if it's re-energized ,the unit will automatically start to run by the memory of last time.
Button
MODE button
Press MODE key to select and display the run mode as below:
Press FAN key to select and display the run mode as below:
FAN button
Fan speed is not adjustable under dry mode.
AUTO, low, medium, high
1)Press TEMP. or TEMP. each time, the preset temp. will increase or decrease 1 and the range of adjustment is
16-30 .Under AUTO mode , this button doesn't work .
2) Press the temp. buttons and simultaneously,all the buttons function on the display screen willl be shielded .If press
the two keys once again, the shield will be released.
TEMP setting button (TEMP and TEMP )
Y ou can press this button to set the time for AUTO ON when the unit is stopped, or set the time for AUTO OFF when the
unit is running. Each press of TIMER button will increase the time setting by 0.5h. If you keep holding down this button, the
time setting will automatically increase by 0.5h every 0.5s. The setting range is 0.5-24hr.
(5) Swing button
(4) Timer Button
Press SWING button once, SWING will be displayed. If indoor fan has been in operation, the swing motor will work. If press
this button again, SWING will be disappeared and swing motor will be stopped.
In this mode, indoor fan will select the fan speed(high, medium, low) according to the change of ambient temperature.
Once the fan speed is started, it can be switched according to the condition only after running for 30s.
Auto fan speed control of indoor fan
more than 2 hrs 2hrs
1hr
setting temperature Tpreset
Tpreset
Tpreset
Tpreset