TOYOTA
RS3200 P
LUS
SECURITY SYSTEM
Page 11
RADAR SENSOR INFORMATION
RADAR SENSOR CHECK PROCEDURE
1.
A
RM
the system.
Press the LOCK button on the remote control or lock the doors
with the key.
(Remember, the system will not ARM if any door is open.)
2. Wait until the S
TATUS
M
ONITOR’S
LED starts flashing.
The LED will flash 30 seconds after the last door or hatch is closed.
3. Move inside the vehicle.
When movement occurs inside the vehicle, an alarm will be triggered
immediately. If sensor detects 2nd movement within 60 seconds after
the 1st warn away alarm trigger, then a regular ALARM activates for 60
seconds.
Note: If you find that the system does not perform as expected, contact
your Toyota dealer for more information.
4.
D
ISARM
the system to stop the A
LARM
.
Press the UNLOCK button on the remote control or use the key to
DISARM the system.
RADAR SENSOR OFF MODE (If equipped)
THE RADAR SENSOR CAN BE DEACTIVATED. PERFORM THE FOLLOWING:
1.
P
USH THE
SENSOR OFF
SWITCH ON THE INSTRUMENT PANEL BEFORE
ARMING BY KEY OR REMOTE CONTROL
.
Immobilizer LED starts blinking.
2.
ARM
THE SYSTEM WITH THE REMOTE CONTROL OR KEY WHILE THE IMMO
-
BILIZER
LED
IS BLINKING
.
T
HE
RADAR SENSOR
WILL DEACTIVATE DURING ARMING
.
NOTE: I
F YOU DISARM THE SYSTEM AFTER YOU SET THE RADAR SENSOR
OFF,
YOU HAVE TO REPEAT THE ABOVE PROCEDURE WHEN YOU
ARM THE SYSTEM IF YOU WANT TO DEACTIVATE THE RADAR SEN
-
SOR AGAIN
.
THE SYSTEM WILL AUTOMATICALLY CANCEL THE
RADAR SENSOR OFF MODE WHEN DISARMED
.
All manuals and user guides at all-guides.com
