manualshive.com logo in svg

Toyota Tundra guide, Руководство пользователя, Страница: 243 / 672

Поделиться
Скачать
Toyota Tundra guide Скачать руководство пользователя страница 243

243

4-5. Using the driving support systems

4

Dr

ivi

ng

■

If the PCS warning light flashes or illuminates, and a warning message is
displayed on the multi-information display

The pre-collision system may be temporarily unavailable or there may be a
malfunction in the system.

●

In the following situations, the warning light will turn off, the message will
disappear and the system will become operational when normal operating
conditions return:
• When the radar sensor or camera sensor or the area around either sen-

sor is hot, such as in the sun

• When the radar sensor or camera sensor or the area around either sen-

sor is cold, such as in an extremely cold environment

• When the radar sensor or front grille emblem is dirty or covered with

snow, etc.

• When the part of the windshield in front of the camera sensor is fogged

up or covered with condensation or ice
(Defogging the windshield: 

→

P. 414, 421)

• If the camera sensor is obstructed, such as when the hood is open or a

sticker is attached to the windshield near the camera sensor

●

If the PCS warning light continues to flash or illuminate, or the warning mes-
sage does not disappear, the system may be malfunctioning. Have the vehi-
cle inspected by your Toyota dealer immediately.

■

If VSC is disabled

●

If VSC is disabled (

→

P. 304), the pre-collision brake assist and pre-collision

braking functions are also disabled.

●

The PCS warning light will turn on and “VSC Turned Off Pre-Collision Brake
System Unavailable” will be displayed on the multi-information display.

Содержание Tundra guide

































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов