Toyota Tacoma 2000, Руководство по эксплуатации

Страница: 102 / 268

’00 Tacoma(U)
102
“N” (neutral position): Lever at “N”
No power is delivered to the wheels. The
vehicle must be stopped.
“L4” (low speed position, four- wheel
drive): Lever at “L4”
Use this for maximum power and traction.
Use “L4” for climbing or descending steep
hills, off- road driving, and hard pulling in
sand, mud or deep snow.
The four- wheel drive indicator light comes
on when the “H4”, “N” or “L4” mode is
selected.
See “(d) Shifting procedure (lever/button
type)” for further instructions.
(b) Free- wheeling hubs
To engage the free- wheeling hubs, turn
the hubs to “LOCK”. To disengage, turn
the hubs to “FREE”.
Make sure the triangle mark on the hub
aligns with the other one at the side you
wish to set.
Setting the free- wheeling hubs in “FREE”
allows you to disengage the front axle and
driveshaft so that they are not revolving.
This reduces noise and wear when the
vehicle is in two- wheel drive.
You should drive with the hubs in “LOCK”
for at least 16 km (10 miles) each month.
This will assure that the front drive com-
ponents are lubricated.
Steel wheels
Aluminum wheels
(c) A.D.D. (automatic
disconnecting differential)