Toyota T100 1996, Руководство по обслуживанию, Страница: 366 / 2062

BE6653
P24209
A00086
ON
ECM
1
2
3
4
1 1
11 10
11
9 9
Throttle Position
Sensor
E6 E6
(M/T)(A/T)
5 V
VCC
VTA
IDL
E2
B+
E1
12
(+)
(
− )
E6 E6
E6
E6
E6 E6
DI − 102
− DIAGNOSTICS ENGINE (3RZ − FE)
1996 TOYOTA T100 (RM449U)
OBD II scan tool (excluding TOYOTA hand − held tester):
1 Check for open in harness or ECM.
PREPARATION:
(a) Disconnect the throttle position sensor connector.
(b) Turn the ignition switch ON.
CHECK:
Measure voltage between terminals 3 and 4 of throttle position
sensor connector.
OK:
Voltage: 9 − 14 V
OK Confirm good connection at sensor.
If OK, replace throttle position sensor.
NG
2 Check for open in harness and connector between throttle position sensor and
ECM (See page IN − 26 ).
NG Open in harness between ECM and throttle
position sensor.
OK
Confirm connection at ECM.
If OK, replace ECM.