Toyota SEQUOIA 2006, Руководство пользователя

Страница: 230 / 479

’06_SEQUOIA_U (L/O 0508)
220
Compact disc player
Push and hold “ ” (preset button 6) or
“ ” (preset button 5) to fast forward or
reverse within a compact disc. When you
release the button, the compact disc play-
er will resume playing.
AM
Push the “AM” button to turn on the radio
and select the AM band. “AM” will appear
on the display.
AUDIO CONTROL (Tone and sound bal-
ance adjustment function)
Each time you push the “AUDIO
CONTROL” knob, the mode changes. To
adjust the tone and balance, turn the
knob.
BAS: Adjusts low
− pitched tones. The dis-
play ranges from − 5 to 5.
MID: Adjusts mid − pitched tones. The dis-
play ranges from − 5 to 5.
TRE: Adjusts high − pitched tones. The dis-
play ranges from − 5 to 5.
FAD: Adjusts the sound balance between
the front and rear speakers. The display
ranges from F7 to R7.
BAL: Adjusts the sound balance between
the right and left speakers. The display
ranges from L7 to R7.
DISC (Compact disc)
Push the “DISC” button to play a compact
disc.
When the audio system is set into com-
pact disc operation, the display shows the
track, or track and disc number currently
being played.
Vehicles with rear seat entertainment sys-
tem—
The “DISC” button may also be used to
operate a DVD player when a disc is
loaded in the DVD player. Pressing the
“DISC” button changes between the CD
player and DVD player. When the DVD
player is in operation, “AUX” appears on
the display.
Error messages
If the player malfunctions, your audio sys-
tem will display following error messages.
“WAIT”: The compact disc player unit
may be too hot. Allow the player to cool
down.
“ERROR 1”: The disc may be dirty, dam-
aged or inserted incorrectly (up − side
down). Clean the disc and re − insert it.
“ERROR 3”: There is a problem inside
the system. Eject the disc or magazine.
Set the disc or magazine again.
“ERROR 4”: Over − current. Ask your
Toyota dealer to inspect.
If the malfunction still exists, take your
vehicle to your Toyota dealer.
"
DISC
!
Use these buttons to select a disc you
want to listen to.
Push “
"
” (preset button 3) or “
!
” (preset
button 4) until the number of the disc you
want to listen appears on the display.
Dolby
"
B NR
∗
If you are listening to a tape that was
recorded with Dolby
"
B Noise Reduction,
push “ ” (preset button 3). “ ” will
appear on the display. Push the button
again to turn off Dolby
"
B NR.
The Dolby NR mode reduces tape noise
by about 10 dB. For best sound reproduc-
tion, play your tapes with this button on
or off according to the mode used to re-
cord the tape.
∗
: Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation. “DOLBY” and the
double D symbol are trademarks of Dolby Laboratories
Licensing Corporation.