Toyota RAV4 (RHD) - MMC, Руководство пользователя

Страница: 421 / 646

420 5-9. Bluetooth
®
Phone
4 Press (SEND) to send
tones.
Pressing (BACK) preserves the
number and returns to the previous
screen.
Pressing (“EXIT”) or (“Wait”)
deletes the number and go to “Entering
a number” screen.
 Phone number containing a “p”
symbol
When the “p” symbol is dialed in an
outgoing call, there will be a pause
for 2 seconds before the following
digits are dialed automatically.
 Phone number containing a “w”
symbol
When the “w” symbol is dialed in an
outgoing call, you need to press
(SEND) again to dial following dig-
its.
This operation can be performed
while driving.
Your voice volume that the other
party hears from their speaker can
be adjusted.
1 Press (SendVol)
2 Use the “TUNE•SELECT” knob
to adjust the volume. (-5 to +5)
To decrease the volume: Turn the
“POWER VOLUME” knob counter-
clockwise.
To increase the volume: Turn the
“POWER VOLUME” knob clock-
wise.
■ When talking on the phone
● Do not talk simultaneously with the
other party.
● Keep the volume of the received voice
down. Otherwise, voice echo will
increase.
■ Automatic volume adjustment
When vehicle speed is 80 km/h (50
mph) or more, the volume automatically
increases. The volume returns to the
previous volume setting when vehicle
speed drops to 70 km/h (43 mph) or
less.
■ Phone call system functions
Depending on the cellular phone, certain
functions may not be available.
■ Situations where the system may
not recognize your voice
● When driving on a rough road
●
When driving at high speeds
● When air is blowing out of the vents
onto the microphone
● When the air conditioning fan emits a
loud noise
Adjusting the outgoing vol-
ume
Setting call volume