NOTE: If battery is disconnected, the power back door needs to be reinitialized.
1. When the liftgate reaches the desired height, push the rear liftgate close-button
(on the door jam of the liftgate) once. Press and hold the button until the buzzer
sounds.
2. To reset the height, with the liftgate open and not moving, press and hold the
rear liftgate close-button until it buzzer sounds 4 times, and continue to hold until
it buzzes again -then let go. Push the same button to close the liftgate. When you
next open the liftgate it will open to the maximum height.
3. To set the height using the Multi-Information Display, press or meter control
switches and select
from the MID. Press or and select
and
then press . Select Opening Adjustment, then press . Select desired
position (5 height options to choose from,) then press .
NOTE: If the liftgate has stopped operating, check inside the glove box, on the
left side, to ensure the PWR DOOR OFF button has not been pushed.
For more details, see Owner’s Manual.
OVERVIEW
FEATURES & OPERATIONS
TOYOT
A SAFETY SENSE
SAFETY & EMERGENCY FEATURES
15
Daytime Running Light system (DRL)
Automatically turns on the headlights at a reduced intensity.
Automatic On/Off
1
The side marker, parking, tail, license plate, instrument panel and headlights turn
on and off automatically
Automatic Off
1
Automatically turns lights off after a delay of 30 seconds, or when the lock switch
on remote is pushed after all the doors are locked.
Automatic High Beam
Designed to automatically turn on or off high beams as necessary.
1
If equipped.
1
The right hand signals will flash three times.
2
The left hand signals will flash three times.
Front fog lights come on only when the headlights are on low beam.
To automatically open/close Power Liftgate
Put your foot near the lower center
part of the rear bumper for less than 2-seconds to trigger sensor. To operate, make
sure that the touchless sensor operation is enabled and that you are carrying the
remote.
To automatically open/close Power Liftgate
Put your foot near the lower center
part of the rear bumper and move it away to trigger sensor. To operate, make sure
that the touchless sensor operation is enabled and that you are carrying the remote.
Door-Power Liftgate
(if equipped)
Instrument panel
Power Liftgate (back door)
Touchless Power Liftgate (if equipped)
(open only)
Sensor area
(close only)
Carry remote
Smart key feature
Open: Push and hold
Close: Push and hold again
Stop: Push once during
operation to stop
PROGRAMMABLE POWER LIFTGATE
High beam
flasher
2017_RAV4-HV_QRG_D8_1.indd 15
9/22/16 2:14 AM
