Toyota RAV4 2020, Руководство пользователя, Страница: 229 / 275

227
7
7-1. Phone operation (Hands-free system for cellular phones)
Phone
Select to display the keypad to
send tones. (

P.225)
Select to send tones. This but-
ton only appears when a num-
ber that contains a (w) is dialed
in hands-free mode. (

P.227)
Select to adjust your voice vol-
ume that the other party hears
from their speaker. (

P.228)
Select to mute your voice to the
other party.
Select to mute the Navigation
route guidance during a phone
call.
*
Select to change handset
modes between hands-free and
cellular phone.
Select to put a call on hold. To
cancel this function, select “Acti-
vate”.
Select to hang up the phone.
*
: With navigation function
●
Changing from hands-free call to cel-
lular phone call is not possible while
driving.
●
When cellular phone call is changed
to hands-free call, the hands-free
screen will be displayed and its func-
tions can be operated on the screen.
●
Changing between cellular phone call
and hands-free call can be performed
by operating the cellular phone
directly.
●
Transferring methods and operations
will be different depending on the type
of cellular phone you have.
●
For the operation of the cellular
phone, see the manual that comes
with it.
■
By keypad
1
Select “0-9”.
2
Enter the desired number.
■
By selecting “Release tones”
“Release tones” appear when a
continuous tone signal(s) contain-
ing a (w) is registered in the contact
list.
This operation can be performed
while driving.
1
Select “Release tones”.
●
A continuous tone signal is a charac-
ter string that consists of numbers and
Talking on the
Bluetooth
®
hands-free
system
While talking on the phone, the
following screen is displayed.
The operations outlined below
can be performed on this
screen.
Call screen operation
A
B
C
D
E
F
Sending tones
G
H