manualshive.com logo in svg

Toyota RAV4 2019, Руководство пользователя, Страница: 45 / 244

Поделиться
Скачать
Toyota RAV4 2019 Скачать руководство пользователя страница 45

45

2-2. Connectivity settings

2

Ba
sic function

2

Select the desired connec-
tion method.

“Vehicle”: Select to connect the 

audio player from the vehicle’s 

audio/visual system.
“Device”: Select to connect the 

vehicle’s audio/visual system from 

the audio player.

Depending on the audio 
player, the “Vehicle” or 
“Device” connection method 
may be best. As such, refer to 
the manual that comes with 
the audio player.

The Bluetooth

®

 settings can be 

confirmed and changed.

1

Display the Bluetooth

®

 set-

tings screen. (

P.40)

2

Select “Detailed Settings”.

3

Select the desired item to be 
set.

Select to set Bluetooth

®

 con-

nection on/off. (

P.45)

Select to change the auto-
matic connection priority of 
the registered Bluetooth

®

 

devices. (

P.46)

Select to edit the system 
information. (

P.46)

Select to reset all setup 
items.

1

Select “Bluetooth Power”.

When “Bluetooth Power” is on: 

The Bluetooth

®

 device is auto-

matically connected when the 
engine switch <power switch> is 
in ACC or ON.
When “Bluetooth Power” is off: 
The Bluetooth

®

 device is dis-

connected, and the system will 
not connect to it next time.

●

While driving, the auto connection 

state can be changed from off to 

on, but cannot be changed from 

“Detailed Settings” 
screen

Changing “Bluetooth 
Power”

A

B

C

D

Содержание RAV4 2019





















































































































































































































































Отзывы:

Нет отзывов