Toyota RAV4 2019 Скачать руководство пользователя страница 184

Страница: 184 / 244

184

7-1. Phone operation (Hands-free system for cellular phones)

Display the phone top
screen. (



P.172)

Select “Message”.



A confirmation message
appears when the “Automatic
Message Transfer” function is
set to off (



P.196), select

“Yes”.

Check that the message
screen is displayed.

“Phone”: Select to change to phone

mode.



The account name is dis-
played on the left side of

screen.



Account names are the
names of the accounts that
exist on the currently con-
nected phone.



The following functions can
be used on message function:

• Receiving a message

(



P.184)

• Checking messages

(



P.185)

• Replying to a message (dicta-

tion reply) (



P.186)

• Replying to a message (quick

reply) (



P.186)

• Calling the message sender

(

• Message settings (

When an e-mail/SMS/MMS is
received, the incoming message
screen pops up with sound and
is ready to be operated on the
screen.

Select to check the message.

Select to not open the mes-
sage.

Select to call the message
sender.

Bluetooth

phone

message function

Received messages can be
forwarded from the con-
nected Bluetooth

phone,

enabling checking and
replying using the system.
Depending on the type of
Bluetooth

phone con-

nected, received messages
may not be transferred to
the system.
If the phone does not sup-
port the message function,
this function cannot be
used. Even when the sup-
ported phone is used, reply
function may not be used.

Displaying the message
screen

Receiving a message

A
B

Содержание RAV4 2019




















































































































































































































































Результаты поиска

Содержание RAV4 2019

Отзывы:

Toyota RAV4 2019, Руководство пользователя, Страница: 184 / 244

Результаты поиска

Содержание RAV4 2019

Отзывы: