Toyota RAV4 2000, Руководство пользователя

Страница: 112 / 219

102
To scan all the frequencies:
Quickly push and release "SCAN". If you
hear a beep, you held the button too long,
and the radio will scan the preset sta-
tions. The radio will find the next station
up the station band, stay there for a few
seconds, and then scan again. To select
a station, push "SCAN" a second time.
To scan the preset stations:
Push and hold "SCAN" until you hear a
beep. The radio will tune in the next pre-
set station up the band, stay there for a
few seconds, and then move to the next
preset station. To select a station, push
"SCAN" a second time.
Compact disc player
There are two scan featuresyou can ei-
ther scan the tracks on a specific disc or
scan the first tracks of all the discs in the
magazine.
Scanning for the tracks on a disc:
Quickly push and release "SCAN". "SCAN"
will appear on the display and the player
will scan all the tracks on the disc you
are listening to. If you hear a beep, you
held the button too long, and the player
will scan the first tracks of all the discs
in the magazine. To select a track, push
the "SCAN" a second time. If the player
scanned all the tracks on the disc, it will
stop scanning.
Compact disc auto changer only
Scanning for the first tracks of all the
discs in the magazine:
Push and hold "SCAN" until you hear a
beep. "D·SCAN" will appear on the display
and the player will perform the first track
of the next disc. To select a disc, push
the "SCAN" a second time. If the player
has scanned all the discs, it will stop
scanning.
ST (Stereo reception) display
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. "ST" appears on the display. If the
signal becomes weak, the radio reduces
the amount of channel separation to pre-
vent the weak signal from creating noise.
If the signal becomes extremely weak, the
radio switches from stereo to mono recep-
tion.
TAPE
Push "TAPE" to switch from radio or com-
pact disc operation to cassette operation.
If the audio system is off, you can turn
on the cassette player by pushing "TAPE".
In both cases, a cassette must already be
loaded in the player.
TRACK (Track up/down button):
Compact disc player
By using this button, you can skip up or
down to a different track.
Push either side of the track button sever-
al times until the number of the track you
want to listen to appears on the display.
If you want to return to the beginning of
the current track, push the down side of
the button one time, quickly.