31
1-2. Opening, closing and locking the doors
1
Before driving
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at
least 5 seconds, and repeat step 2.)
■
Battery-saving function
In the following circumstances, the entry function is disabled in order to pre-
vent the vehicle and electronic key batteries from discharging.
●
When the entry function has not been used for 2 weeks or more
●
When the electronic key has been left within approximately 3 ft. (1 m) of
the vehicle for 10 minutes or more
The system will resume operation when...
●
The vehicle is locked using the door handle lock button.
●
The vehicle is locked/unlocked using the wireless remote control func-
tion. (
→
P. 38)
●
The vehicle is locked/unlocked using the mechanical key. (
→
P. 451)
Mode
Unlocking doors
Beep
Driver’s door
unlocking mode
Hold the driver's door han-
dle to unlock only the
driver's door.
Exterior: Beeps twice
Interior: Pings once
Hold the front passenger’s
door handle to unlock all
doors
All doors unlocking
mode
Hold either front and back
door handle to unlock all
doors
Exterior: Beeps twice
Interior: Pings once