Toyota PZQ14-60120 Скачать руководство пользователя страница 1

Do not slam bonnet.

Installation Time: Approx. 15 mins

H4012

ISSUE 2: 10/05/10

Page 1 of 4

Place these instructions in vehicle’s glove box after installation is complete

Accessory Part No. 

PZQ14-60120

May 2010 Production Onwards 

ACRYLIC HEADLAMP COVERS

FJ CRUISER

Installation Instructions

Clean Headlamp Covers
with a mild detergent and 
water solution.

Care Instructions:

Part No. PZQ14-60120

Do not use automatic
car wash. 

Do not use abrasive,
spirit or solvent 
based cleaners. 

1

1

PZQ14-60120

2

PZQ14-60120-FK

Qty

Part number

Item

Component Name

Headlamp Covers Set

Fitting Instructions

Metal Clips

Abrasive Resistant Tapes

Washers

Screws

Alcohol Wipe

1

4

4

4

4

1

PARTS, SERVICE & ACCESSORIES

Содержание PZQ14-60120

Страница 1: ... COVERS FJ CRUISER Installation Instructions Clean Headlamp Covers with a mild detergent and water solution Care Instructions Part No PZQ14 60120 Do not use automatic car wash Do not use abrasive spirit or solvent based cleaners 1 1 PZQ14 60120 2 PZQ14 60120 FK Qty Part number Item Component Name Headlamp Covers Set Fitting Instructions Metal Clips Abrasive Resistant Tapes Washers Screws Alcohol W...

Страница 2: ...Q14 60120 FK x 4 METAL CLIPS x 1 FITTING INSTRUCTION For external use only AUTOMOTIVE SURFACE CLEANER IMPREGNATED WITH 70 ISOPROPLY ALCOHOL For use in cleaning painted metal glass and other vehicle surfaces Dispose of properly after use x 1 ALCOHOL WIPE x 4 ABRASIVE RESISTANT TAPES x 4 SCREWS x 4 WASHERS HEADLAMP COVER PZQ14 60120 EXPLODED VIEW EXPLODED VIEW ...

Страница 3: ...adlamp assembly Note the slot in the bottom of the Headlamp Cover and the dual lock discs Mark these locations onto the headlamp assembly with a non permanent marker Remove the Headlamp Cover See Dia 3 Diagram 3 4 At the previously noted and marked slots positions clean the headlamp lens with the alcohol wipe provided Remove any residue with a clean dry cloth Adhere the abrasive resistant tape str...

Страница 4: ...lamp assembly Position the bottom slot over the metal clip aligning the hole in the clip with the slot in Headlamp Cover press down over the metal clips and at the same time apply upwards pressure to Headlamp Cover Then secure the Headlamp Cover with screws and washers provided See Dia 6 1 2 3 Once the Headlamp Cover is correctly positioned Clean the headlight lens with the alcohol wipe provided a...

Отзывы: