TOYOTA
PRIUS
2010–
TVIP V4
PROCEDURE
REMOTE ENGINE STARTER (RES)
Page 24 of 33
Issue : D 05/22/09
Place the Vehicle in Park (P)
e.
or Neutral (N) position.
Cycle the Smart Key Ignition
f.
Button from OFF to ON 5
times.
NOTE:
One cycle consists of:
OFF
→
Accessory
→
ON. This is
equivalent to pressing the Smart
Key Ignition Button 14 times.
LOOK:
for the Hazard Lights to
Flash once.
Locate the 1P RES
c.
Diagnostic Connectors in
the Driver’s Side Cowl Area
and connect them.
NOTE: Once connected you will
have 10 minutes to complete this
section, steps d–x.
Close all doors.
d.
Registration
7.
Open the Hood.
a.
Temporarily reconnect the
b.
Negative Battery Cable.
CAUTION:
Do not touch the
Positive Terminal.
Fig. 7-2
Fig. 7-3
